Facilities
Type of Facility
Organization of Facility
- (-) Remove European Commission filter European Commission (6)
- (-) Remove LUT filter LUT (5)
- (-) Remove ICN-Pitesti filter ICN-Pitesti (1)
- IRSN (19) Apply IRSN filter
- KIT (8) Apply KIT filter
- CEA (7) Apply CEA filter
- MTA-EK (5) Apply MTA-EK filter
- Ciemat (3) Apply Ciemat filter
- KTH (3) Apply KTH filter
- Fortum (1) Apply Fortum filter
- FZ-Jülich (1) Apply FZ-Jülich filter
- Paul Scherrer Institut (1) Apply Paul Scherrer Institut filter
The JRC-Ispra FARO plant was a large multipurpose test facility in which reactor severe accidents could be simulated by out-of-pile experiments.
The JRC-Ispra FARO plant is a large multipurpose test facility in which reactor severe accidents could be simulated by out-of-pile experiments.
EU FASTNET PROJECT CALCULATIONS
The Institute for Nuclear Research Pitesti (ICN) has as main activity objective the scientific research, the fundamental and applied technological development, the exploitation of its own research through technology transfer, design, investments, consultancy, expertise and technical specialized a
The test section of the KROTOS facility consists of a stainless steel test section bolted to lugs welded on the inner side walls of a stainless steel pressure vessel.
The LOBI Project originated from a reactor safety research and development contract between the European Commission and the former Bundesminister für Forschung und Technologie of the Federal Republic of Germany.
PACTEL is a volumetrically scaled (1: 305) facility including a pressurizer, high and low pressure emergency core cooling systems, and accumulators. The reactor vessel is simulated with a U-tube construction including separate downcomer and core sections.
To study the behavior of the PCCS configuration planned to be used in the ABWR II concept and to gain experimental data for the validation work of MELCOR severe accident code, a scaled down PCCS model was designed and constructed at Lappeenranta University of Technology in Finland in 2012–2013.
The PWR PACTEL facility consists of a reactor pressure vessel model, two loops with vertical steam generators, a pressurizer, and emergency core cooling systems. The new loops and steam generators of EPR style construction enable the PWR and EPR related experimental research.
The test section was located downstream of the mixing vessel; it consisted of four steel pipes connected in series and/or parallel.