Facilities
Type of Facility
Organization of Facility
- (-) Remove CEA filter CEA (7)
- (-) Remove European Commission filter European Commission (6)
- (-) Remove Ciemat filter Ciemat (3)
- IRSN (19) Apply IRSN filter
- KIT (8) Apply KIT filter
- LUT (5) Apply LUT filter
- MTA-EK (5) Apply MTA-EK filter
- KTH (3) Apply KTH filter
- Fortum (1) Apply Fortum filter
- FZ-Jülich (1) Apply FZ-Jülich filter
- ICN-Pitesti (1) Apply ICN-Pitesti filter
- Paul Scherrer Institut (1) Apply Paul Scherrer Institut filter
ARIGS is one of the programs on the aerosol retention on the tubes surrounding the breach within the secondary side of the steam generator in the absence of water. Its development has been internationally framed within the EU-SGTR and the ARTIST programs.
The JRC-Ispra FARO plant was a large multipurpose test facility in which reactor severe accidents could be simulated by out-of-pile experiments.
The JRC-Ispra FARO plant is a large multipurpose test facility in which reactor severe accidents could be simulated by out-of-pile experiments.
EU FASTNET PROJECT CALCULATIONS
The test section of the KROTOS facility consists of a stainless steel test section bolted to lugs welded on the inner side walls of a stainless steel pressure vessel.
The LOBI Project originated from a reactor safety research and development contract between the European Commission and the former Bundesminister für Forschung und Technologie of the Federal Republic of Germany.
The test section was located downstream of the mixing vessel; it consisted of four steel pipes connected in series and/or parallel.
VITI (‘‘VIscosity Temperature Installation’’) experimental assembly: (1) VITI chamber, (2) graphite crucible, (3) ZrCcoating, (4) studied mixture, (5) graphite susceptor, (6) thermal shield, (7) support for crucible, (8) support for thermal shield, (9) inductance coil, (10) pyrometer – measure of
In the hypothetical case of a nuclear reactor severe accident, the reactor core could melt and form a mixture, called corium, of highly refractory oxides (UO2, ZrO2) and metallic or oxidized steel, that could eventually flow out of the vessel and mix with the basemat decomposition products (gener