ARIGS is one of the programs on the aerosol retention on the tubes surrounding the breach within the secondary side of the steam generator in the absence of water. Its development has been internationally framed within the EU-SGTR and the ARTIST programs. Experimental activities were focused on setting up a reliable database in which the influence of gas mass flow rate, breach configuration and particle nature in the aerosol retention are properly considered. Theoretical activities are aimed at developing a predictive tool (ARISG) capable of assessing source term attenuation in the scenario with reasonable accuracy. Given the major importance of jet aerodynamics, 3D CFD analyses are being conducted to assist both test interpretation and model development.
ARISG-I was a step forward in the modeling of the aerosol retention of the steam generator. According to this analysis the main areas where research is needed are: gas jet behavior across the tube bank; particle resuspension, erosion, and/or bouncing; and particle inertial impaction and turbulent deposition under foreseen conditions.
No description available.
Steam generator reliability and performance are serious concerns in the operation of pressurized water reactors. The aim of the SGTR project was to provide a database of fission product retention in steam generator tube rupture sequences and models, which could be applied to estimate the effectiveness of different accident management strategies in these kind of accidents.
The SGTR project made an important step forward to resolve uncertainties of physical models, especially in the aerosol deposition and mechanical resuspension in turbulent flows. There was one sampling at the injection line for the Optical Particle Counter (OPC) aimed at determining the aerosol size distribution and quantifying the mass concentration at the inlet. Within the vessel atmosphere eight samplings were taken to six filters and two cascade impactors, from which the mass concentration exiting the tube mini-bundle was estimated.
The test mini-bundle is a scaled mock-up of the first stage of the steam generator tube bundle. It consists of a squared arrangement housing inside a total of 117 tubes plus four supporting rods placed in the corners. The mini-bundle allows two possible locations of the broken tube. One place is just at the centre of the structure and the other place is three tubes away from the centre.